Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Level Sensors & Transmitters

Liquid level is the widest part of our catalogue because no single principle suits every tank. Float switches give a dry contact at one or more discrete points and need no power. Magnetic level gauges read directly from a red-and-white flip column — no electronics at all — and can add a 4–20 mA transmitter for remote indication. Magnetic-induction and magnetostrictive transmitters give continuous 4–20 mA or RS485 output over 3 to 5 metres. Submersible transmitters convert hydrostatic head into a signal and suit deep wells and reservoirs. Capacitive models handle viscous and coating media. Where foam, build-up or aggressive chemistry rules out contact sensing, the microwave switch detects through the wall of the vessel.

What it measures

  • Point level
  • Continuous level
  • Interface

Available outputs

  • Dry contact
  • Relay
  • 4–20 mA
  • 0–10 V
  • RS485 Modbus

17 models in this family

Sorted by typical duty — workhorse models first

HWS10 Rod Float Level Switch
HWS10Level

Rod Float Level Switch

1–4 set-points

Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.

View specifications
HWS20 Rod Float Level Switch
HWS20Level

Rod Float Level Switch

Extended body

The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.

View specifications
HLS01 Cable Float Level SwitchIllustrative image
HLS01Level

Cable Float Level Switch

SPDT, 15 A

Injection-moulded float on a flexible rubber cable, switching 15 A at 250 V AC through an SPDT contact. Suits long cable runs, multiple points on one drop, submersible pumps and media carrying granular solids. IP68, specific gravity above 0.6.

View specifications
HTS11 Magnetic Level Gauge
HTS11Level

Magnetic Level Gauge

Top-mounted

Direct-reading magnetic flip gauge for top mounting, 200–6000 mm range, 10 MPa and up to 450 °C. Red-and-white flip column needs no power; a 4–20 mA transmitter and magnetic memory switches can be added for remote indication and alarms.

View specifications
HTS22 Magnetic Level Gauge
HTS22Level

Magnetic Level Gauge

Side-mounted

Side-mounted direct-reading magnetic flip gauge, 200–6000 mm, 10 MPa, up to 450 °C. Flange or threaded connection, optional 4–20 mA output and magnetic memory switches. Explosion-proof and corrosion-resistant construction for hazardous and high-pressure service.

View specifications
HWT10 Magnetic Induction Level Transmitter
HWT10Level

Magnetic Induction Level Transmitter

Continuous, 4–20 mA

Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.

View specifications
HWT20 Magnetic Induction Level Transmitter
HWT20Level

Magnetic Induction Level Transmitter

Local LCD display

Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.

View specifications
HWT2088 Magnetic Induction Level Controller
HWT2088Level

Magnetic Induction Level Controller

4 relay outputs

Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.

View specifications
HWT100 Magnetic Induction Level Controller
HWT100Level

Magnetic Induction Level Controller

5 relays, dual supply

Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.

View specifications
HMS10 Magnetostrictive Level Transmitter
HMS10Level

Magnetostrictive Level Transmitter

High accuracy

Non-contact magnetostrictive level transmitter, 50–5000 mm, with 0.005 % FS non-linearity and 0.002 % FS repeatability — an order of magnitude better than reed-chain instruments. 4–20 mA, 0–10 V or RS485 output, explosion-proof, IP67.

View specifications
HPS10 Submersible Level TransmitterIllustrative image
HPS10Level

Submersible Level Transmitter

Hydrostatic, IP68

Hydrostatic level transmitter for wells, reservoirs and sumps. Range 0.05–300 m, 4–20 mA two-wire, 0.1 or 0.2 accuracy class, ceramic-capacitive or piezoresistive sensor. Ventilated cable prevents condensation, IP68.

View specifications
HPS20 Submersible Level TransmitterIllustrative image
HPS20Level

Submersible Level Transmitter

Local display

The HPS10 hydrostatic transmitter with a local display head, so the level can be read at the well head. 0.05–300 m, 4–20 mA, accuracy class 0.1 or 0.2, IP68 probe, condensation-resistant vent.

View specifications
HPS2088 Submersible Level Controller
HPS2088Level

Submersible Level Controller

4 relays

Submersible hydrostatic transmitter with a 24-bit A/D front end, LED display, four relay outputs and 4–20 mA / 0–10 V / 1–5 V analogue output. Range 0.5–300 m, alarm points set from the keypad, stainless and aluminium housing.

View specifications
HPS100 Submersible Level / Pressure Controller
HPS100Level

Submersible Level / Pressure Controller

5 relays, RS485

Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.

View specifications
HCT100 Capacitive Level Controller
HCT100Level

Capacitive Level Controller

5 relays, RS485

Coaxial capacitive level transmitter and controller, 100–5000 mm, with 24-bit A/D, five relays, RS485 Modbus and selectable analogue output. Handles viscous and coating media where float instruments would seize. 316 stainless probe.

View specifications
HCT40 Capacitive Level Controller
HCT40Level

Capacitive Level Controller

2 relays

Coaxial capacitive level controller with two relay outputs, LED display and 24-bit A/D. 100–5000 mm, 4–20 mA / 0–10 V / 1–5 V selectable, stainless probe. The compact option for simple high/low control on viscous media.

View specifications
HSM-VB106 / VB107 Microwave Level Switch
HSM-VB106 / VB107Level

Microwave Level Switch

Non-contact through-wall

Microwave resonance switch that detects level through the vessel wall, so nothing protrudes into the process. Works on solids and liquids with dielectric constant above 1.5, ignores foam, and tolerates sticky conductive build-up. PEEK and stainless wetted parts, 115 °C standard or 150 °C with heat sink.

View specifications

Need a model that is not in the catalogue?

Send us the medium, range, thread and output you need. Most custom configurations are quoted from the factory engineering desk rather than handed to a trading partner.