Level Sensors & Transmitters
HWT10 Magnetic Induction Level Transmitter
Continuous, 4–20 mA

HWT10 technical data
Measurement
- Range
- 0–3000 mm
- Resolution
- 5 mm
- Output
- 4–20 mA DC
- Load impedance
- 750 Ω
Electrical
- Supply voltage
- DC 24 V (12–36 V)
- Power consumption
- ≤ 0.72 W
Mechanical
- Working temperature
- −10 to +100 °C
- Working pressure
- 0–1 MPa, or to customer specification
- Guide tube diameter
- Φ9 – Φ25 mm
- Tube material
- Stainless steel 316L / 304
- Housing material
- Aluminium alloy
- Connection
- Flange or thread
- Ingress protection
- IP67
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HWT10Magnetic Induction Level Transmitter
Continuous, 4–20 mA
Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Continuous 4–20 mA output, two-wire
- Range up to 3000 mm, 5 mm resolution
- Explosion-proof aluminium housing
- All-stainless wetted parts, 316L or 304
- Unaffected by foam, vapour or dielectric change
How it works
Instead of separate switch points, the HWT10 fills the guide tube with a series of reed modules and precision resistors. A magnetic float closes the reeds at its own height, and the resulting resistance is converted to a continuous 4–20 mA signal proportional to level. The electronics live inside an explosion-proof aluminium housing, and the tube and float are 316L or 304 stainless, so the instrument suits fuel and chemical tanks as well as water. There is no capacitive drift and no ultrasonic dead zone; the output follows the float directly.
Typical applications
- Fuel and lube oil tank gauging
- Chemical storage with flammable contents
- Water and wastewater level control
- Tanks where ultrasonic or radar would be defeated by foam
Not certain HWT10 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments

Magnetic Induction Level Transmitter
Local LCD display
Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.
View specifications
Magnetic Induction Level Controller
4 relay outputs
Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.
View specifications
Magnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
View specifications
Rod Float Level Switch
1–4 set-points
Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.
View specifications