Level Sensors & Transmitters
HWT2088 Magnetic Induction Level Controller
4 relay outputs

HWT2088 technical data
Measurement
- Range
- 0–3000 mm
- Resolution
- 5 mm
- Output
- 4–20 mA or 1–5 V
- Alarm outputs
- 4 relays
- Load impedance
- 750 Ω
Electrical
- Supply voltage
- DC 24 V (12–36 V)
- Power consumption
- ≤ 2 W
Mechanical
- Working temperature
- −10 to +100 °C
- Working pressure
- 0–1 MPa, or to customer specification
- Guide tube diameter
- Φ9 – Φ25 mm
- Tube material
- Stainless steel 316L / 304
- Housing material
- Aluminium alloy
- Connection
- Flange or thread
- Ingress protection
- IP67
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HWT2088Magnetic Induction Level Controller
4 relay outputs
Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Four relay outputs with keypad-set alarm points
- Bright LED display readable in daylight
- 4–20 mA or 1–5 V analogue output in parallel
- Explosion-proof housing
- Settings changed without opening the housing
How it works
The HWT2088 adds a controller to the reed-chain transmitter: four relays, each with an alarm point set from the front keypad, alongside the standard analogue output. That means a single instrument can start and stop a pump, raise high and low alarms, and still feed a 4–20 mA signal to the control room, without a separate trip amplifier. The LED display is readable in daylight, and the settings are changed by key rather than by internal jumpers, so a change of duty does not need the housing opened.
Typical applications
- Pump control with high and low cut-outs from one probe
- Tank farms without a dedicated PLC
- Chemical dosing tank level interlock
Not certain HWT2088 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments

Magnetic Induction Level Transmitter
Continuous, 4–20 mA
Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.
View specifications
Magnetic Induction Level Transmitter
Local LCD display
Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.
View specifications
Magnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
View specifications
Submersible Level Controller
4 relays
Submersible hydrostatic transmitter with a 24-bit A/D front end, LED display, four relay outputs and 4–20 mA / 0–10 V / 1–5 V analogue output. Range 0.5–300 m, alarm points set from the keypad, stainless and aluminium housing.
View specifications