Level Sensors & Transmitters
HPS100 Submersible Level / Pressure Controller
5 relays, RS485

HPS100 technical data
Measurement
- Measuring range
- 0.5–300 m
- Sensor type
- Piezoresistive, ceramic piezoresistive or ceramic capacitive
- Accuracy class
- 0.2 or 0.5
- Overload pressure
- 1.5× full-scale
- Sampling rate
- 4 readings per second
- Display range
- −1999 to 9999
- Long-term stability
- 0.5 % FS/year
- Power supply effect
- ≤ 0.1 % FS
Electrical
- Supply voltage
- DC 24 V, AC-DC 110 V, AC-DC 220 V
- Power consumption
- ≤ 5 W
- Analogue output
- 4–20 mA / 0–10 or 20 mA / 0–5 or 1–5 V DC
- Relay outputs
- 5 pairs
- Relay rating
- 3 A at 250 V AC, 3 A at 30 V DC
- Relay life
- > 100 000 operations
- Communications
- RS485
- A/D conversion
- 24-bit
Mechanical
- Ambient temperature
- −20 to +70 °C
- Medium temperature
- −20 to +80 °C
- Storage temperature
- −40 to +120 °C
- Relative humidity
- 0–80 %
- Housing material
- Stainless steel + aluminium alloy
- Connection
- Flange or thread
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HPS100Submersible Level / Pressure Controller
5 relays, RS485
Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Five relays plus RS485 Modbus
- Dual-row high-brightness LED display
- Drops into a standard 100 mm gauge cut-out
- Accepts 24 V DC or 110–220 V AC-DC
- Range 0.5–300 m
How it works
The HPS100 is the communications-equipped member of the family: five relays, RS485 Modbus for supervisory systems, and a 24 V DC or 110–220 V AC-DC supply so it can be dropped into an existing panel. The 100 mm round case takes the place of a standard pressure gauge, which makes it a straightforward retrofit where a mechanical gauge currently sits and someone has to walk out and read it. Dual-row LED display shows live value and set-points at the same time.
Typical applications
- Replacing mechanical pressure gauges with a switched, reporting instrument
- Pump control with SCADA supervision
- Water network pressure and level monitoring
Not certain HPS100 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments
Illustrative imageSubmersible Level Transmitter
Hydrostatic, IP68
Hydrostatic level transmitter for wells, reservoirs and sumps. Range 0.05–300 m, 4–20 mA two-wire, 0.1 or 0.2 accuracy class, ceramic-capacitive or piezoresistive sensor. Ventilated cable prevents condensation, IP68.
View specifications
Illustrative imageSubmersible Level Transmitter
Local display
The HPS10 hydrostatic transmitter with a local display head, so the level can be read at the well head. 0.05–300 m, 4–20 mA, accuracy class 0.1 or 0.2, IP68 probe, condensation-resistant vent.
View specifications
Submersible Level Controller
4 relays
Submersible hydrostatic transmitter with a 24-bit A/D front end, LED display, four relay outputs and 4–20 mA / 0–10 V / 1–5 V analogue output. Range 0.5–300 m, alarm points set from the keypad, stainless and aluminium housing.
View specifications
Magnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
View specifications