Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Level Sensors & Transmitters

HWS20 Rod Float Level Switch

Extended body

Request a quote

HWS20 technical data

Measurement

Measuring range
To customer specification
Set-points
1–4, positions to customer drawing
Media
Water, oil and similar liquids

Electrical

Contact rating
10 W
Contact resistance
Max. 0.2 Ω
Insulation resistance
100 MΩ at 500 V DC

Mechanical

Working pressure
0–6.3 MPa
Medium temperature
−20 to +150 °C
Rod diameter
Φ9 mm – Φ25 mm
Rod / float / flange material
SUS 304 or 316L
Terminal box
Aluminium alloy
Mounting
Flange or thread
Ingress protection
IP65

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Level Sensors & Transmitters

HWS20Rod Float Level Switch

Extended body

The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • Longer body for insulated or deep tanks
  • Passive dry contact, no power required
  • 1–4 custom-positioned set-points
  • All-stainless wetted path
  • No calibration, no electronics to drift

How it works

Where the HWS10 mounts close to the vessel, the HWS20 extends the rod and terminal arrangement for tanks with thick insulation or long nozzles. The sensing principle is unchanged: a magnetic float trips sealed reed elements inside a stainless rod, producing passive dry contacts with no supply wiring. Up to four points can be set to your drawing, each with a separate pair of wires, and the wetted parts are all stainless so the switch tolerates water, oil and mildly aggressive media.

Typical applications

  • Deep tanks with long mounting nozzles
  • Insulated process vessels
  • Reservoir and sump level control

Not certain HWS20 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other level instruments

View the family →