Flow Sensors & Switches
S400 Mass Flow Controller
Closed loop, 100–200 L/min

S400 technical data
Flow
- Flow ranges
- 100 L/min, 150 L/min, 200 L/min
- Control range
- 5–100 % of full scale
- Measuring range
- 0–100 % of full scale
- Accuracy
- ±1.0 % FS
- Linearity
- ±0.5 % FS
- Repeatability
- ±0.2 % FS
- Response time
- 2 s (T98 within ±2 % FS of set-point)
- Differential pressure required
- 100 L/min: 0.1–0.3 MPa; 150 L/min: 0.15–0.3 MPa; 200 L/min: 0.2–0.3 MPa
- Proof pressure
- 3 MPa
- Leak rate
- 1×10⁻² Pa·m³/s (helium)
Electrical
- Supply
- ±15 V DC ±5 %, 15 V at 1 MΩ
- Set-point input
- 4–20 mA, 1–5 V DC or 0–5 V DC
- Flow output
- 0–5 V DC (≤ 3 mA load), 4–20 mA, 1–5 V DC or 0–5 V DC
- Connector
- D-SUB 15, D-SUB 9
Mechanical
- Valve type
- Solenoid proportional, normally closed
- Mounting orientation
- Any
- Fittings
- Swagelok 3/8″ or 10 mm; VCR 1/2″
- Ambient temperature
- 5–45 °C
- Accuracy-guaranteed temperature
- 15–35 °C
- Weight
- 2.8 kg
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Flow Sensors & Switches
S400Mass Flow Controller
Closed loop, 100–200 L/min
Closed-loop gas flow controller combining a thermal flow sensor and a normally-closed solenoid valve in one body. Three ranges — 100, 150 and 200 L/min — with ±1 % FS accuracy, 2 s response and 5–100 % control range. Swagelok or VCR fittings, ±15 V DC supply.
Engineering reply · Evaluation samples available · Custom ranges built to order
- True closed-loop control, not just measurement
- Three flow ranges: 100, 150 and 200 L/min
- ±1.0 % FS accuracy, ±0.2 % FS repeatability
- Normally-closed valve — fails safe on loss of power
- Mounts in any orientation
How it works
Where the HSM switches detect flow, the S400 regulates it. A thermal sensor measures the actual flow and a normally-closed solenoid valve modulates in response, so the controller holds the set-point instead of merely reporting it. Control range is 5–100 % of full scale, which means the valve still has authority at low flow rather than shutting off abruptly. Linearity is ±0.5 % FS and repeatability ±0.2 % FS, with a 2 s settling time to within ±2 % of set-point. Accuracy is specified between 15 and 35 °C; outside that band the unit still works, but the specification widens. Body is rated to 3 MPa with a helium leak rate below 1×10⁻² Pa·m³/s, and the fittings are Swagelok 3/8″ or 10 mm, or VCR 1/2″.
Ordering notes
- Specify gas type at order — the calibration is gas-specific and cannot be transferred between media without recalibration.
- Requires the stated differential pressure; below it the valve loses control authority at the top of the range.
Typical applications
- Analytical instrument gas supply
- Semiconductor and vacuum process gas lines
- Laboratory rigs needing a repeatable flow set-point
- Packaging and welding shielding gas control
Not certain S400 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other flow instruments
Illustrative imageThermal Flow Switch
Single set-point
Thermal-dispersion flow switch with a single adjustable set-point, sealed all-in-one stainless body rated IP67 and 100 bar. Relay, PNP, NPN or 4–20 mA output, G1/2 thread as standard. No paddle and no moving part in the flow path, so scale and debris cannot jam it.
View specifications
Illustrative imageThermal Flow Switch
Dual set-point
Two independently adjustable set-points on one thermal flow switch, giving alarm and trip from a single instrument. Two potentiometers set the thresholds; red, yellow and green LEDs report which band the flow is in. IP68 sealed body, relay or PNP/NPN output, rated to 100 bar.
View specifications
Illustrative imageDigital Thermal Flow Switch
LED display
Thermal flow switch with a four-digit LED display showing live flow velocity, set by two front-panel keys rather than a screwdriver. Reverse-polarity, short-circuit and overload protected. Handles media up to 100 °C and pressures to 100 bar, sealed to IP67.
View specifications