Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Motion, Photoelectric & Metering

SBG10 Air Damper Control System

Manual / automatic

Request a quote

SBG10 technical data

Pneumatic

Operating pressure
0.2–1.0 MPa
Medium
Air
Port size
8 mm, 10 mm, 15 mm
Connection
G1/2, M20×1.5, M22×1.5
Manifold material
Aluminium alloy, silver

Electrical

Supply voltage
DC 24 V, DC 110 V, DC 220 V, AC 110 V
Power consumption
< 10 W

Operation

Automatic mode
Left valve to AUTO, right valve to 0 — left and right solenoid coils drive damper close and reverse-flush
Manual mode
Left valve to MANUAL — right valve selects close or reverse-flush directly

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Motion, Photoelectric & Metering

SBG10Air Damper Control System

Manual / automatic

Integrated pneumatic control block for air dampers: two imported hand valves plus a vertical solenoid valve on one manifold, with automatic and manual modes that interlock so only one is active. 0.2–1.0 MPa air, DC 24/110/220 V or AC 110 V.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • Automatic and manual modes with mechanical interlock
  • Two imported hand valves plus a vertical solenoid valve on one block
  • No interconnecting pipework — compact and light
  • Imported solenoid with high resistance to contaminated air
  • Optional pressure gauge module and filter
  • Ports 8, 10 and 15 mm

How it works

A damper on a duct needs more than one actuator: it needs to open, close, and reverse-flush, under either automatic or manual control. The SBG10 puts all of that on one aluminium manifold — two imported hand valves and a vertical solenoid valve, with the mode selected by turning the left-hand valve. In automatic, the right-hand valve sits at zero and the solenoid's left and right coils drive close and reverse-flush. Switch to manual, and the right-hand valve selects close or flush directly. The two modes interlock mechanically, so an operator cannot be fighting the solenoid. A pressure gauge module and filter can be added on the same block.

Typical applications

  • Duct damper actuation in ventilation systems
  • Furnace and kiln air control
  • Bag-filter reverse-flush sequencing
  • Manual override during commissioning or maintenance

Not certain SBG10 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other motion & metering instruments

View the family →