Industrial IoT & Wireless Sensing
HSM-WT Wireless Temperature Sensor
4G / LoRa / NB-IoT

HSM-WT technical data
Measurement
- Element
- Pt100 / Pt1000 platinum resistance
- Probe
- 304 or 316 stainless steel
- Response
- Linear with temperature
Electrical
- Local output
- RS485 Modbus RTU, or 0.25–2.5 V analogue
- Wireless uplink
- 4G / LoRa / NB-IoT
- Power
- Wired, battery, or cyclic supply
- Protection
- Designed against RF, surge and EMI
- Compliance
- IEC and CE (EMC)
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Industrial IoT & Wireless Sensing
HSM-WTWireless Temperature Sensor
4G / LoRa / NB-IoT
Battery-powered temperature sensor for remote networks, using a Pt100/Pt1000 element in a 304 or 316 stainless probe. Wired, battery or cyclic supply; RS485 Modbus or analogue locally; 4G, LoRa or NB-IoT uplink.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Pt100 / Pt1000 element in 304 or 316 stainless
- 4G, LoRa or NB-IoT uplink
- Battery or cyclic supply
- RS485 Modbus and analogue local outputs
- CE (EMC) compliant, surge-protected
How it works
A platinum element in a stainless sheath, packaged with a low-power radio and a battery. The Pt100/Pt1000 response is linear with temperature, so the calibration is stable and the reading can be checked against a reference at any time. Intended for supply networks, environmental monitoring, cold chain, HV transmission assets and any site where a walk-round temperature check is currently the only option.
Typical applications
- Water and gas supply network temperature
- Cold chain and warehouse monitoring
- HV transmission asset temperature
- Environmental and agricultural monitoring
- Unmanned manufacturing sites
Not certain HSM-WT is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other industrial iot instruments

Wireless Pressure Sensor
4G / LoRa / NB-IoT
Battery-powered pressure sensor for unmanned pipeline and network monitoring. Wired, battery or cyclic supply; RS485 Modbus, I²C or 0.25–2.5 V output locally; 4G, LoRa or NB-IoT to the cloud. CE (EMC) compliant with digital temperature compensation.
View specifications
Industrial Edge Gateway
4G / Wi-Fi / broadband
Edge gateway with 4G, Wi-Fi and broadband uplinks, protocol parsing and edge computing. Local configuration software reports CPU/RAM/ROM, firmware, network state; NAT and port mapping, TLS transport encryption, hardware and software watchdog.
View specifications
Wireless Level Sensor
Submersible or capacitive
Battery-powered level sensor for reservoirs, tanks and networks. Hydrostatic submersible or capacitive sensing, RS485 Modbus or analogue locally, 4G / LoRa / NB-IoT uplink. For sites with no power and no cable route.
View specifications
Wireless Gas Sensor
Toxic and combustible
Wireless gas sensor for toxic and combustible gas monitoring in plants and buildings, with wired or battery supply and a choice of wireless uplink. Used for confined-space safety, combustion monitoring, food and beverage process control and medical diagnostics.
View specifications