Industrial IoT & Wireless Sensing
HSM-WP Wireless Pressure Sensor
4G / LoRa / NB-IoT

HSM-WP technical data
Measurement
- Measured quantity
- Gauge or absolute pressure
- Element
- Low-power pressure die with digital temperature compensation
- Compensation
- Calibration values stored on chip and applied automatically
Electrical
- Local output
- RS485 Modbus RTU, I²C, or 0.25–2.5 V analogue
- Wireless uplink
- 4G / LoRa / NB-IoT
- Power
- Wired, battery, or cyclic supply
- Protection
- Reverse polarity; designed against RF, EMI and surge
- Compliance
- IEC and CE (EMC)
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Industrial IoT & Wireless Sensing
HSM-WPWireless Pressure Sensor
4G / LoRa / NB-IoT
Battery-powered pressure sensor for unmanned pipeline and network monitoring. Wired, battery or cyclic supply; RS485 Modbus, I²C or 0.25–2.5 V output locally; 4G, LoRa or NB-IoT to the cloud. CE (EMC) compliant with digital temperature compensation.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Battery or cyclic supply — no mains needed
- 4G, LoRa or NB-IoT uplink
- On-chip temperature compensation, no seasonal drift
- RS485 Modbus RTU, I²C and analogue outputs
- Designed against RF, EMI and surge, CE (EMC) compliant
- Polarity-protected
How it works
Built for the places where there is no mains power and no cable route: oil and gas gathering lines, heating networks, fire-water mains and remote valve chambers. The sensing element is a low-power pressure die with on-chip temperature compensation, calibrated values stored in the chip and applied automatically, so winter-to-summer drift does not appear as a pressure change. Locally the sensor gives RS485 Modbus RTU, I²C or a 0.25–2.5 V analogue output; remotely it reports over 4G, LoRa or NB-IoT, and the data lands in a cloud platform for storage and trending.
Ordering notes
- Range, process connection and battery life are fixed at order — specify the expected reporting interval so the power budget can be sized.
Typical applications
- Oil and gas gathering and transmission lines
- District heating networks
- Fire-water main pressure
- Unmanned valve and metering chambers
- Remote wellheads
Not certain HSM-WP is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other industrial iot instruments

Wireless Temperature Sensor
4G / LoRa / NB-IoT
Battery-powered temperature sensor for remote networks, using a Pt100/Pt1000 element in a 304 or 316 stainless probe. Wired, battery or cyclic supply; RS485 Modbus or analogue locally; 4G, LoRa or NB-IoT uplink.
View specifications
Industrial Edge Gateway
4G / Wi-Fi / broadband
Edge gateway with 4G, Wi-Fi and broadband uplinks, protocol parsing and edge computing. Local configuration software reports CPU/RAM/ROM, firmware, network state; NAT and port mapping, TLS transport encryption, hardware and software watchdog.
View specifications
Wireless Level Sensor
Submersible or capacitive
Battery-powered level sensor for reservoirs, tanks and networks. Hydrostatic submersible or capacitive sensing, RS485 Modbus or analogue locally, 4G / LoRa / NB-IoT uplink. For sites with no power and no cable route.
View specifications
Wireless Gas Sensor
Toxic and combustible
Wireless gas sensor for toxic and combustible gas monitoring in plants and buildings, with wired or battery supply and a choice of wireless uplink. Used for confined-space safety, combustion monitoring, food and beverage process control and medical diagnostics.
View specifications