Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Linear Displacement Transducers

MDS10 Draw-Wire Displacement Transducer

50–20 000 mm

Request a quote

MDS10 technical data

Measurement

Range
50–20 000 mm
Repeatability
0.05 % FS
Linearity
0.25 % FS
Cable tension
≥ 0.3 kg

Electrical

Supply voltage
DC 12–24 V
Output
4–20 mA, 0–5 / 0–10 V, 0–5 kΩ
Load impedance
≥ 5000 Ω (voltage); ≤ 750 Ω (current)
Power consumption
1 W (current); 2 W (voltage)
Insulation resistance
≥ 100 MΩ

Mechanical

Cable material
Stainless steel 316L
Operating temperature
−20 to +80 °C
Storage temperature
−50 to +120 °C
Ingress protection
IP65

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Linear Displacement Transducers

MDS10Draw-Wire Displacement Transducer

50–20 000 mm

Draw-wire position transducer measuring up to 20 m from a compact housing where a rod will not fit. 0.05 % FS repeatability, 0.25 % FS linearity, 4–20 mA or 0–10 V, stainless 316L cable, IP65.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • Up to 20 m measuring range
  • Compact body — fits where a rod cannot
  • Stainless 316L cable, 0.3 kg minimum tension
  • 4–20 mA, 0–5 V, 0–10 V or 0–5 kΩ output
  • IP65

How it works

A draw-wire transducer unreels a stainless cable from a spring-loaded drum and measures the rotation. Because the cable is flexible, the measuring range can be long while the body stays small — up to 20 m from a unit that fits in your hand. That makes it the practical choice for overhead cranes, telescopic booms, lift travel and anything where a 10 m rod is not an option. Linearity is 0.25 % FS and repeatability 0.05 % FS, so it is a positioning instrument rather than a metrology reference.

Ordering notes

  • The cable is a wear item; route it to avoid abrasion at the exit and do not allow it to snap back unloaded.

Typical applications

  • Overhead crane and hoist position
  • Telescopic boom extension
  • Lift and elevator travel
  • Long-stroke test rigs

Not certain MDS10 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other displacement instruments

View the family →