Linear Displacement Transducers
ER Linear Displacement Sensor
50–1000 mm, 1 ms update

ER technical data
Measurement
- Effective stroke
- 50–1000 mm, other lengths to order
- Non-linearity
- 0.05 % FS
- Resolution
- ±0.1 mm (stroke < 400 mm); stroke ÷ 4096 (stroke > 400 mm)
- Repeatability
- Same as resolution
- Update time
- 1 ms (four-wire connection)
Electrical
- Current output
- 4–20 mA or 0–20 mA (load 0–500 Ω)
- Voltage output
- 0–10 V DC or 0–5 V DC (load ≥ 10 kΩ)
Mechanical
- Housing
- Extruded aluminium
- Rod
- 304L stainless steel
- Connection
- M12 five-pin aviation connector
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Linear Displacement Transducers
ERLinear Displacement Sensor
50–1000 mm, 1 ms update
Linear displacement sensor with 50–1000 mm travel, 1 ms update time on four-wire connection, 0.05 % FS non-linearity and ±0.1 mm resolution. 4–20 mA or 0–10 V, aluminium housing, 304L rod, M12 five-pin connector.
Engineering reply · Evaluation samples available · Custom ranges built to order
- 1 ms update on four-wire connection
- 0.05 % FS non-linearity
- 4–20 mA or 0–10 V output
- Aluminium body, 304L stainless rod
- M12 five-pin connector
How it works
The ER series is a shorter-stroke, faster-updating position sensor for general automation. Update time is 1 ms on the four-wire connection, which is quick enough to close a position loop rather than merely report a position. Resolution is ±0.1 mm below 400 mm of travel and range/4096 above it. The aluminium extrusion carries a 304L stainless rod and terminates in an M12 five-pin aviation connector, so it drops into a standard machine wiring harness.
Typical applications
- Machine tool axis position
- Valve and damper feedback
- Packaging machine stroke
Not certain ER is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other displacement instruments

Rod-Type Linear Transducer
0.05 % linearity
Rod-type linear position transducer for direct coupling to a moving member. Strokes 50–1250 mm, 0.05 % linearity, 0.01 mm resolution, 100-million-cycle life, 4–20 mA or 0–10 V output, IP65.
View specifications
Draw-Wire Displacement Transducer
50–20 000 mm
Draw-wire position transducer measuring up to 20 m from a compact housing where a rod will not fit. 0.05 % FS repeatability, 0.25 % FS linearity, 4–20 mA or 0–10 V, stainless 316L cable, IP65.
View specifications
Magnetostrictive Displacement Transducer
Non-contact, 0.002 % FS
Non-contact magnetostrictive position transducer with 0.005 % FS non-linearity and 0.002 % FS repeatability. Strokes 50–5000 mm, 4–20 mA, 0–10 V or RS485, explosion-proof, IP67. No wiper to wear out.
View specifications
Magnetostrictive Displacement Sensor
25–2500 mm, 16-bit
Non-contact magnetostrictive position sensor, 25–2500 mm stroke, 16-bit D/A giving ±0.01 mm resolution on the voltage output. 1 ms update to 1 m stroke, 0.05 % FS non-linearity, IP67, −40 to +75 °C.
View specifications