Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Ultrasonic Proximity Sensors

UB1000-18GM55 Ultrasonic Proximity Sensor

60–1000 mm, M18

Request a quote

UB1000-18GM55 technical data

Measurement

Sensing range
60–1000 mm
Dead zone
0–60 mm
Resolution
0.17 mm
Repeatability
±0.15 % of full scale
Accuracy
±1 % with built-in temperature drift compensation
Response time
52 ms
Switching hysteresis
±2 mm
Switching frequency
19 Hz

Electrical

Supply voltage
10–30 V DC, reverse-polarity protected
Output
1 switching output, NPN or PNP, NO or NC
Input
Synchronisation and teach-in
No-load current
≤ 30 mA
Overload protection
200 mA; red and green LEDs flash together
Load impedance
I: 0–300 Ω; U: > 1 kΩ
Indication
Red LED on with no target, flashes during teach-in; green LED on with target detected

Mechanical

Barrel size
M18 × 55 mm
Construction
Cylindrical
Material
Nickel-plated brass sleeve, plastic parts, glass-filled epoxy resin
Connection
5-pin M12
Weight
38 g
Ambient temperature
−25 to +70 °C
Storage temperature
−40 to +85 °C
Ingress protection
IP67

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Ultrasonic Proximity Sensors

UB1000-18GM55Ultrasonic Proximity Sensor

60–1000 mm, M18

Metre-range M18 ultrasonic sensor: 60–1000 mm, 60 mm dead zone, 0.17 mm resolution, 52 ms response. PNP/NPN switching, teach-in, IP67, 38 g.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • 1 m range from an M18 barrel
  • 0.17 mm resolution
  • Teach-in configuration
  • IP67, 38 g
  • Suits bin and hopper fill height

How it works

One metre of range in an 18 mm barrel is useful for bin and hopper work where the sensor mounts on the lid and has to see the product surface at low fill. Sound at these distances spreads widely, so mount away from side walls and structural steel — the 60 mm dead zone is the near limit, but the practical limit is usually reflection from surrounding surfaces.

Typical applications

  • Bin and hopper fill height
  • Tank level where contact is undesirable
  • Large pallet detection

Not certain UB1000-18GM55 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other ultrasonic instruments

View the family →