Pressure Transmitters & Controllers
PCD2088 Pressure Transmitter Controller
4 relays

PCD2088 technical data
Measurement
- Pressure range
- −0.1 to 0, and 0 to 60 MPa
- Sensor type
- Diffusion silicon, ceramic piezoresistive or ceramic capacitive
- Accuracy class
- 0.2 or 0.5
- Overload pressure
- 1.5× full-scale
- Sampling rate
- 4 readings per second
- Display range
- −1999 to 9999
- Long-term stability
- 0.5 % FS/year
- Power supply effect
- ≤ 0.1 % FS
Electrical
- Supply voltage
- DC 24 V
- Power consumption
- ≤ 3 W
- Analogue output
- 4–20 mA / 0–10 or 20 mA / 0–5 or 1–5 V DC
- Relay outputs
- 4 pairs
- Relay rating
- 3 A at 250 V AC, 3 A at 30 V DC
- Relay life
- > 100 000 operations
- A/D conversion
- 24-bit
Mechanical
- Ambient temperature
- −20 to +70 °C
- Medium temperature
- −20 to +80 °C
- Storage temperature
- −40 to +100 °C
- Relative humidity
- 0–80 %
- Housing material
- Stainless steel + aluminium alloy
- Connection
- G1/2, M20×1.5 or to order
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Pressure Transmitters & Controllers
PCD2088Pressure Transmitter Controller
4 relays
Pressure transmitter with a 24-bit A/D, LED display, four relay outputs and selectable analogue output. −0.1 to 60 MPa, 0.2 accuracy class, diffusion-silicon, ceramic piezoresistive or ceramic capacitive sensor, stainless and aluminium housing.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Four relay outputs with keypad-set trip points
- Selectable 4–20 mA, 0–10/20 mA, 0–5 or 1–5 V output
- 24-bit A/D, 4 readings per second
- −0.1 to 60 MPa range
- Choice of diffusion-silicon or ceramic sensor
How it works
The PCD2088 pairs a pressure sensor with a controller in one 2088 head: 24-bit conversion, a display readable across a plant room, four relays with keypad-set trip points, and a selectable analogue output to the control system. It is the right instrument when a pressure switch and a transmitter are both currently installed on the same line — one device then covers measurement, local indication and interlock, and there is only one calibration record to keep. Sensor type is selected to suit the medium: diffusion silicon for clean gas and liquid, ceramic piezoresistive or capacitive for chemically aggressive service.
Typical applications
- Replacing separate pressure switch and transmitter
- Pump and compressor pressure interlock
- Hydraulic power-unit monitoring
- Pressure control on gas trains
Not certain PCD2088 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other pressure instruments

Differential Pressure Transmitter
0.2 class, 40:1 turndown
Differential pressure transmitter covering 0–0.2 kPa to 40 MPa with a 40:1 turndown and 0.2 accuracy class. Two-wire 4–20 mA, 750 Ω load, stainless housing, IP65. Built on a δ-cell capacitive sensor with a 0.10 mm measuring diaphragm.
View specifications
Differential Pressure Transmitter
Bidirectional, 2088 housing
Bidirectional differential pressure transmitter spanning −100 kPa to 200 kPa, in the standard 2088 housing with a liquid-crystal head. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, stainless body, IP65.
View specifications
Differential Pressure Transmitter
Compact stainless body
Compact differential pressure transmitter, −100 kPa to 200 kPa, in a small stainless body for tight installation space. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, G1/2 or M20×1.5, IP65.
View specifications
Pressure Transmitter Controller
5 relays, 150 mm case
Five relay outputs in a Φ150 mm gauge case, with dual 24 V DC / 220 V AC supply so it replaces a mechanical gauge in situ. −0.1 to 60 MPa, 0.2 accuracy class, high-brightness LED display, selectable analogue output.
View specifications